Whatsapp Email Get a Auota

Revolutionizing Indonesia's Manufacturing Industry with Metal Injection Molding Technology

Indonesia is known for its vast natural resources that create a suitable market for manufacturing. The demand for metal parts in various fields, including aerospace, medical instruments, and automotive industries, is increasing, which pushes the manufacturing industry to develop new technologies. The introduction of metal injection molding (MIM) technology in Indonesia is a significant breakthrough towards achieving optimized and cost-effective manufacturing.

MIM technology is also known as powder injection molding, which uses metal powder to produce complex parts of different shapes and sizes. Metal injection molding produces parts with high precision and accuracy, which is not possible with traditional manufacturing methods. It is a solution for industries looking for mass production of parts with improved dimensional control and high complexity.

Moreover, this technology is ideal for industries where lightweight and high strength products are required, such as the automotive industry. MIM technology has proven to increase efficiency in the manufacturing process, improving product performance, and reducing costs.

Indonesia has embraced the metal injection molding trend, with companies such as PT. Tiphone Mobile Indonesia, PT. Lippo Cikarang Tbk, and PT. Aneka Tambang, using the technology. These companies have moved from traditional manufacturing methods to MIM technology, and the results have been significant.

Despite the benefits of MIM technology, it is essential to note that the process requires a high level of expertise and professionalism. The manufacturing process of the MIM involves several steps, including powder blending, mold injection, sintering, and finishing. Thus, it requires an adequately skilled workforce to operate the machinery and ensure consistent quality control.

However, with the right workforce, Indonesia's manufacturing industry can leverage MIM technology to meet the demand for high-precision and high-complexity metal products. In conclusion, metal injection molding technology presents an opportunity for Indonesia's manufacturing industry to revolutionize their production process, create efficient production lines, and produce high-quality metal parts at a reduced cost.

indonesia metal injection molding

On-demand Rapid Injection Molding

Sigma’s rapid tooling service helps you to have the low volume to large volume plastic parts done, with no compromise on the material selection.

  • No MOQ required
  • Get the rapid tooling as fast as 2 weeks
  • Free DFM
  • 24/7 engineering support

Our rapid injection molding Application

Sigma Technik Limited's rapid injection molding service injects molten plastic materials into molds using injection molding machines and molds, and cools and solidifies them over a certain period of time, ultimately forming the required plastic parts. This manufacturing process is usually suitable for producing small and medium-sized plastic parts, which can obtain high-quality and precise parts in a short period of time.

Plastic Injection Molding

Injection molding is a common manufacturing process to produce low volume to large volumes of parts typically made out of plastic. The process involves injecting molten material into a mold and letting it cool to a solid-state.

Liquid Silicone Rubber Molding

Liquid Silicone Rubber is known as LSR, which is a process used to produce parts made from silicone rubber, widely used create products such as medical devices, automotive parts, baby care products, and many others.

2K Injection molding

2K injection molding is a manufacturing process in which two different types of plastic materials are molded together in a single operation to create a single homogeneous component. This process allows for efficient and cost-effective production of high-quality parts that can perform unique functions.

Overmolding and Insert Molding

Overmolding / Insert molding combines two or more materials into a single part, one of the material is usually soft and flexible, or metal. The purpose of overmolding/insert molding is to add functionality, improve grip, provide protection, or enhance aesthetics.

Mission And Vision

Rapid injection molding materials

ABS

ABS is a type of plastic with high strength, hardness, and toughness. It has good impact resistance and wear resistance, and is suitable for manufacturing shells, components, and models.

PC

PC is a transparent, high-strength, high-temperature resistant, and excellent electrical insulation material. It is suitable for manufacturing transparent components, electronic components, and automotive components.

PP

PP is a relatively flexible material with excellent corrosion resistance and high temperature resistance. It is suitable for manufacturing containers, pipelines, baby bottles, etc.

PA

PA is a material with high strength, high rigidity, and wear resistance. It is suitable for manufacturing gears, bearings, brackets, etc.

POM

POM is a material with excellent wear resistance, toughness, and rigidity. It is suitable for manufacturing gears, bearings, pulleys, etc.

00+

Delicated Employees

00+

Countries Served

00+

Satisfied Customers

00+

Projects Delivered Per Month

About Us

What can we do?

Sigma Technik Limited, as a prototype production company and rapid manufacturer focusing on rapid prototyping and low volume production of plastic and metal parts, has advanced manufacturing technology, one-stop service, diversified manufacturing methods, on-demand manufacturing services and efficient manufacturing processes, which can provide customers with high-quality, efficient and customized product manufacturing services and help customers improve product quality and market competitiveness.

Work

Rapid Injection Molding Service Application

Let’s start a great partnership journey!

Rapid Injection Molding FAQs

Burrs appear on the surface of the product, which affects its aesthetics and safety. The solution can be to adjust the parameters of the injection molding machine, such as temperature, pressure, speed, etc., or to perform post-processing, such as polishing, sandblasting, etc.

The warping deformation of the product is usually caused by unstable parameters such as temperature and pressure of the injection molding machine, or improper mold design. The solution can be to adjust parameters such as temperature and pressure, or to redesign the mold.

The occurrence of bubbles inside the product may be due to the high temperature of the injection molding machine and the high moisture content of the material. The solution can be to reduce the temperature of the injection molding machine, adjust the water content of the material, increase the pressure of the injection molding machine, etc.

The product size deviation is too large, which may be caused by material thermal expansion, mold deformation and other reasons. The solution can be to adjust parameters and optimize mold design based on material characteristics.